Switching Over

[Rook]

I'm thinking of moving over from guns to bow tackle. I am a gun nut and I have many custom, etc. The only gun that interests me is one that is very accurate. I hand load to bench rest standards and try to get the ultimate from my guns. I would like to carry that philosophy into hunting with archery tackle. I am looking for what is the best arrow and what makes it the best arrow? I'm not interested in unsubstantiated responses such as , 'Oh I have this and it works for me'. I simply want to know what can I do to get the best arrow possible and what makes it the best?

[nicholal]

The best arrow is one that is (or has) that closet weight ,straightness and caliper amoung the batch you are getting. and for that YOU WILL HAVE TO DO YOUR HOME WORK

al

[gunslinger]

it took me shooting 4 different types of arrows until i found the one i was confident in at 60 yards and under, i shoot the easton axis 340 now and they fly perfect for me, i have the confidence in them becasue of the true flight they come off my bow. but it took me alot of arrows to find it.

[catnthehat]

Are you talking about compounds or traditional tackle?

I shoot a custom made Jack Kempf flat bow and
Port Orford shafts By Kelly Peterson that are spined pefectly to match my draw weight from that bow.

However, I think you are more or less talking about compounds.
If I'm wrong shoot me a PM.....
Cat

[wctbowtech]

Easton X10 or ACE! Check out Easton's website, they can give you the specs. There not cheap though and most shops would have to order them in as they would never stock them.

[ehntr]

Read this (http://www.huntersfriend.com/2007-Carbon-Arrows/arrow-selection-guide2.htm) link. Know what you need to know.

Matching arrow to bow.....spine (http://mnbowhunters.org/HomePage/3BowhuntingArcheryArticles/5-7-06-NorbMullaneyArrowSpine.htm)of arrow as a measurement in thousandths/inch of deflection, arrow length, arrow weight vs bow draw length and bow draw weight is the first consideration. You have to know that the arrow fits your bow. Arrow straightness is next. Straightness is measured in thousandths/inch and typically between .001 and .006 (over 28 inches). Straighter arrows are more expensive. Hunting arrows are typically not of the .001 variety. If you intend to shoot competitively at long distances (90 metres) then you would push for the straightest arrow you can buy. If all your doing is shooting targets at 20 - 30 yards or treestand hunting at 20 yards or less save your money and buy cheaper arrows. Unless you are highly competitive 300 shooter it is my opinion that you will not notice any difference in shooting a .001 or .006 arrow. That being said and like already said....Do your research and buy the correct arrow in terms of fit and whatever straightness level you want. I have never purchased .001 arrows. I've got .003 (Beman ICS Hunter) and dozen upon dozen of .006 arrows (from various manufacturers). All the big arrow manufactures make good arrows and economical arrows. Lots of unqualified endorsements.......research the specs, pick an arrow that fits. Easton/Beman/Gold Tip/Carbon Express/Arrow Dynamics are some........you'll find endorsements from people for all these arrow manufacturers.

[MathewsArcher]

For target archery indoors the most widely used arrow is still the X7 aluminum arrow that spines properly for your bow.

Outdoors the top arrows shot today include the x10 (250.00/12 and tungsten points 200.00/12) protour specifically designed for 70 m compound competition.

At any major tournament these arrows will be in the majority with the new carbon express nano (used to win the recent outdoor world championships - by a Canadian:eek: Dietmar Trillus) growing in popularity. Any other arrows would definately be in the minority.

Even out of a hooter shooter you will not see a difference in POI between .001 and .006 carbon shafts.

[MathewsArcher]

Arrows that are properly made can definately help increase your accuracy.

Indoors I like to shoot as large of shaft as is legal for the venue I am shooting. FITA competions restrict diameter to 9.3 mm so I start with a 2314 X7 arrow (this spines correctly for my setup). I fletch my indoor arrows with 3 4" feathers as IMO feathers help stabalize the arrow faster and are more forgiving. I square the cut end of my arrow utilizing a G5 ASD and add the insert. I like inserts and screw in points as it allows me to change point weight easily over 1pc target points. Currently I am shooting 145 grain screw in points as they seem to group the best for me.

For Vegas (no arrow size restrictions) I am currently trying some 2712 X7 aluminums as they are much larger in diameter and allow for greater error. Again with feathers but with much heavier 300gr 1 pc points.

Outdoor, with longer shooting distances (90m) and wind, I like the X1o protour, thin shaft, moderately heavy and barrel tapered to reduce drag. Smaller plastic vanes are the norm (1.5-2.0"). These arrows only accomodate 1 pc points and I am running 120 gr points.

Hunting I am currently shooting mid price range carbons and ACCs with either 2" blazer vanes or 4" helical plactics (I'm still unsure of which I like better). Squareing the insert or cut end/Insert with the G5 ASD. I find I very, if ever get a broadhead that willnot spin/fly if I first square the insert before adding my broadhead.

[Rook]

I should clarify, I am using a Hoyt V-Tec with as draw length of 29" set at 64 lbs. My purpose is hunting not target. While I realize most shots are under 30 yards, I took my moose at 60 yds this year and I want to feel comfortable and believe in my equipment to consistently shoot at that distance.

[MathewsArcher]

If your looking for premium hunting shafts I would look at axis full metal jackets or acc's. The consistency of aluminum with some of the benefits of carbon. Have used acc's for years and will likely look at the full metal jackets this year.

[duffy4]

I should clarify, I am using a Hoyt V-Tec with as draw length of 29" set at 64 lbs. My purpose is hunting not target. While I realize most shots are under 30 yards, I took my moose at 60 yds this year and I want to feel comfortable and believe in my equipment to consistently shoot at that distance.

Good thing you mentioned that HUNTING was your main focus and not target archery. The type of equipment you will be looking for is very different from one activity to the other.

Robin in Rocky