PDA

View Full Version : Gas:Oil Ratio


Prdtrgttr
02-29-2008, 09:45 AM
I have a Jiffy Legend Model 31 Ice Auger, it's the 3hp model with a 10" auger.
The motor says 24:1 mix, however, the manual calls for a 40:1 mixture. Thus far I have been using the 24:1 mixture. :huh: However, I am curious if the leaner mixture might make this motor runner better yet? Ideas? Suggestions?

FisherPotch
02-29-2008, 10:11 AM
My father and a friend both have jiffys that they run on 24 to 1 mixtures. They get the job done. My dad has been running his auger for over a decade, likely 1000+ holes per year.

BEL
02-29-2008, 01:18 PM
I go 24:1 with my Jiffy also. No problems and runs well. BEL

spurly
02-29-2008, 02:36 PM
Ijust bought the same auger,and had the same question. If you are using conventional 2 stroke oil 24-1 is required (6ounces of oil to 4litres of fuel).If you use jiffy synthetic,which they recomend in the manual,you can use 40-1 3ounces of oil to 4 litres of fuel. My auger runs smoother with the leaner mixture.The jiffy oil comes in 3ounce bottles and sell for $1.99. I will most likely switch to amsoil or opti-2 they are supposed to be the best. Hope this helps,you can also go to jiffyonice.com for more info.