looking for a good load for 243

[dale grohn]

hey guys just bought a little 243 in a remington 700 for the wife and was looking for a good hand load from around 90 to 105 grains anyone have any input

[Donny Bear]

sorry 5 grains short Barnes 85 gr TSX and 42 gr of varget with Fed 210 primer

Best I have found for my sons deadly accurate and deadly performance

this is a safe load in my sons rifle remember start low and work the load up.

[shakeyleg02]

43gr of h4831 win lg rif primer 95gr partitions gives me an inch at 100 as of yet havent had time to try any other powders

[baptiste_moose]

42gr IMR 4381, CCI BR-2 primer, 100 gr hornady Btsp. 1/2" groups from a sled out the barrel of a savage model 11.

[addictedfisherman]

42.2gr of RL17 pushing a 95gr Hornady SST.

[densa44]

I get good results with Varget and IMR 4007 SSC 100 gr bullet and 39 gr of powder. The short cut powder meters better than the longer options. You can get closer to the 39.5 maximum if you want. I don't anymore but you can try it.

[Donkey Slayer]

with the 85 TSX, 44 g of IMR 4350, 3270 ft/sec, tight groups