View Full Version : Fuel sending unit
TROLLER
09-27-2014, 10:15 AM
Well looks like my sending unit is on the fritz
Fill the tank up and the guage shows half so I am positive it is the sending unit.
Does not look like a real difficult job anyone know if there is one available locally in Calgary area? If not I can always order one on line.
THANKS
How are the other gauges ,or is it just the fuel gauge ?
Lund rebel
09-27-2014, 07:39 PM
Are you able to remove the wires and try to jump the wires together and as long as there is no ECM on the circuit the gauge should read full.
If the sending unit is easy to remove just take it out and manually move the float and see what the gauge is reading.
harrydude
09-27-2014, 08:00 PM
Type of vehicle would help
Lund rebel
09-28-2014, 07:27 AM
Type of vehicle would help
Good point I just assumed it was in his boat
TROLLER
09-28-2014, 08:43 AM
It is on my Crestliner and the gauge is moving so I am 100% sure it is the sending unit.
Saw a few videos on utube so it is not a difficult fix just hoping I could find one in stock locally so I could get it done asap.
harrydude
09-28-2014, 11:10 AM
If you can pull the sending unit out you might be able to match it up
Princess auto might have one in surpluses
Or ufa for a tractor
A sending unit is just a reostat
You can also test it by manually moving the rod. Or just crossing the wires then it will tell u if your gauge is working right
vBulletin® v3.8.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.