Not quit resides

[jdf96ca]

Hey guys so was reloading for me 25-06 n look what I did to a shell hahah had to laugh thought that was hilarious 134466


Sent from my iPhone using Tapatalk

[jdf96ca]

Btw post your reloading fails if u like


Sent from my iPhone using Tapatalk

[gitrdun]

Btw post your reloading fails if u like


Sent from my iPhone using Tapatalk

I've been reloading for going on 3 decades now. And I must admit to have had my fair share of failures. However, they go straight to the garbage bin...(without powder or primers) LOL.

[jdf96ca]

Hahahah I was jk with my buddy guy should reload is well not really but put a bullet in there and ask the range officer if it's safe to shoot hahaha [emoji23]


Sent from my iPhone using Tapatalk

[Dewey Cox]

I think you ran out of punctuation.
I'll lend you some.
......,,;!!
:)

[mgvande]

Hey guys so was reloading for me 25-06 n look what I did to a shell hahah had to laugh thought that was hilarious 134466


Sent from my iPhone using Tapatalk

25-06 short mag. I think your on to something.

[J0HN_R1]

:snapoutofit: :sign0176: :argue2: :angry3: :sign0161: :1041: :sEm_oops2: :sign0023: :sign0087: :126fs2277341: :sign0014: :sign0080:

:confused0024:

[jdf96ca]

25-06 short mag. I think your on to something.



That is a good one should maybe design one hahah


Sent from my iPhone using Tapatalk

[catnthehat]

Btw post your reloading fails if u like


Sent from my iPhone using Tapatalk

Check the sticky at the top of the page
Cat

[elkhunter11]

I honestly had no idea what the thread was about after reading the title.:sHa_sarcasticlol:

[jdf96ca]

Hahh I should change that


Sent from my iPhone using Tapatalk

[jdf96ca]

Actually how u do that lol


Sent from my iPhone using Tapatalk

[Smokinyotes]

Anyone on here that can translate for me?

[jdf96ca]

Translate?


Sent from my iPhone using Tapatalk

[bat119]

Translate?


Sent from my iPhone using Tapatalk

Not quit resides = what?

gibberish?

[jdf96ca]

The shell didn't get resided rather reformed


Sent from my iPhone using Tapatalk

[crazy_davey]

Wow! :scared0015:

[elkhunter11]

The shell didn't get resided rather reformed


Sent from my iPhone using Tapatalk

Resided? You resize the cases when loading, you don't reside them.

[gitrdun]

I saw the title and decided to read the post out of sheer curiousity. The rest is history. No harm, no foul. :)

[jdf96ca]

Resided? You resize the cases when loading, you don't reside them.



Ok I'm sorry Elkhunter that was my bad there for spelling it wrong sorry bout that


Sent from my iPhone using Tapatalk

[gitrdun]

Ok I'm sorry Elkhunter that was my bad there for spelling it wrong sorry bout that


Sent from my iPhone using Tapatalk

No need to be sorry jdf96ca, you're not the only one here with sausage fingers typing on a phone....LOL.

[jdf96ca]

No need to be sorry jdf96ca, you're not the only one here with sausage fingers typing on a phone....LOL.



Hahahahahahah lol well that's good thx buddy


Sent from my iPhone using Tapatalk

[elkhunter11]

Ok I'm sorry Elkhunter that was my bad there for spelling it wrong sorry bout that


Sent from my iPhone using Tapatalk

If you had only posted "reside" once, everyone would know it was a spelling mistake, but after the second time, a person starts to wonder.:thinking-006:

[jdf96ca]

Like I said sorry


Sent from my iPhone using Tapatalk

[TrollGRG]

Pardon me for my ignorance - I am not up there with the greatest when it comes to typing a message but don't you have the option of reading what you have typed before you hit the send button?

There seems to be a lot of people who don't seem to bother.

[gitrdun]

Cut him some slack won't you? :) Just a new guy willing to show his failure. It could be worse and it has. :scared0018:

[jdf96ca]

Pardon me for my ignorance - I am not up there with the greatest when it comes to typing a message but don't you have the option of reading what you have typed before you hit the send button?

There seems to be a lot of people who don't seem to bother.



Btw yes I do have that option ?


Sent from my iPhone using Tapatalk

[Sask Bearman]

25-06 short mag. I think your on to something.

Bingo-good call!

[jdf96ca]

Cut him some slack won't you? :) Just a new guy willing to show his failure. It could be worse and it has. :scared0018:



Thx buddy [emoji108]


Sent from my iPhone using Tapatalk

[jdf96ca]

Just tryna join the community guys sorry if I'm making some one upset but spelling mistakes that happens more than once


Sent from my iPhone using Tapatalk

[bobinthesky]

If you can't form a sentence then reloading can be a real challenge!

[bobtodrick]

Just tryna join the community guys sorry if I'm making some one upset but spelling mistakes that happens more than once


Sent from my iPhone using Tapatalk

Hey, don't sweat it. If you hang around here long you'll find out that it doesn't take much to have half the followers on any given day want to hang you for some reason.
A lot of good folk, but others will vehemently argue if you say the sky is blue.

[fps plus]

From looking at the picture he did reside it and not resize it 🤕

[FCLightning]

From looking at the picture he did reside it and not resize it 🤕

I dunno, I have to go with resize - definitely smaller :)

[58thecat]

New cartridge development...early stages...keep us posted.


We all have squished a few...

[jdf96ca]

Hey, don't sweat it. If you hang around here long you'll find out that it doesn't take much to have half the followers on any given day want to hang you for some reason.

A lot of good folk, but others will vehemently argue if you say the sky is blue.



Gotch thx man


Sent from my iPhone using Tapatalk

[Dean2]

Welcome to the forum. Spelling aside at least you have the guts to admit and publish your mistakes. Might help others. We have all learned from making mistakes, some of us have been REALLY lucky and there have been no serious costs to tour mistakes, others not so lucky. Learn from yours like you are and hope they are all this trivial. All the best.

[jdf96ca]

Welcome to the forum. Spelling aside at least you have the guts to admit and publish your mistakes. Might help others. We have all learned from making mistakes, some of us have been REALLY lucky and there have been no serious costs to tour mistakes, others not so lucky. Learn from yours like you are and hope they are all this trivial. All the best.



Hahah yeah no kidding spelling aside really


Sent from my iPhone using Tapatalk

[fps plus]

One of the biggest loading mistakes I got to see was in 1974 a young fella bought a Ruger M - 77 7 Rem mag .He and his buddies were reloading and went shooting KABBBOOOOOM . Split the stock in half ,blew the magazine follower etc right off the bottom ,blew the extractor off,totally locked the action . Ruined the rifle .He had a broken nose .

They had used a max load of IMR 4895 instead of IMR 4831 OOPS

[jdf96ca]

https://uploads.tapatalk-cdn.com/20170602/a42c55c9a668b1e5c6c78914fc86feea.jpg well guys there I go again hahah did another couple was trying to not push the primers so I could resize the shel before loading (hadn't done it good enough last time) any how that didn't work out great
Any one have to sand/polish down there inside pin yet the one that also has the small primer pusher attached at the bottom?
If yes what did u use for that?


Sent from my iPhone using Tapatalk

[bat119]

You should prime your cases after resizing, if you need to resize your cases further after priming remove the decapping pin from your die.

Do you live anywhere around Lloyd I could come over and help you out.

[DCse7en]

How'd you do that?

[Pathfinder76]

If you can't form a sentence then reloading can be a real challenge!

Laughing!

[Bushrat]

https://uploads.tapatalk-cdn.com/20170602/a42c55c9a668b1e5c6c78914fc86feea.jpg well guys there I go again hahah did another couple was trying to not push the primers so I could resize the shel before loading (hadn't done it good enough last time) any how that didn't work out great
Any one have to sand/polish down there inside pin yet the one that also has the small primer pusher attached at the bottom?
If yes what did u use for that?


Sent from my iPhone using Tapatalk

Looks like the expander button is far to high up inside the die. The neck is getting jammed between the button and the neck portion of the die crushing the case. If you want to resize primed brass without removing the primer you have to take the pin out of the expander button, backing it off so the pin doesn't decap the primer puts the button to high in the die and jambs the neck crushing the case.

[jdf96ca]

You should prime your cases after resizing, if you need to resize your cases further after priming remove the decapping pin from your die.



Do you live anywhere around Lloyd I could come over and help you out.



Hey that's exactly what I ended up doing worked ok just the Center pin I think is a little to thick so that doesn't let the neck squeeze together enough


Sent from my iPhone using Tapatalk

[jdf96ca]

How'd you do that?



Trying to make ur die work with the centre pin pulled out a bit and washers and stuff haha not really a smart thing to do I might ad now that I found out


Sent from my iPhone using Tapatalk

[Dean2]

You seriously need to go back and re-read the instructions on how to properly set up your resizing die. Set up properly you will have none of these problems and you don't need any washers or shaved primers pins to make it work right. RCBS has made millions of dies and 99.98% of them work just fine. Follow the steps EXACTLY and I bet it works just fine.

I am not trying be give you a shot but from your writing it would appear written English may not be one of your strengths. If you can't get the sizing die set up right DO NOT LOAD any live ammo until you can work with someone who can show you how to do it correctly. Loading done wrong can be very dangerous to you and bystanders. Where are you located?

[gitrdun]

Dean2 is absolutely correct. I might suggest that you need to find yourself an experienced mentor.

[jdf96ca]

You seriously need to go back and re-read the instructions on how to properly set up your resizing die. Set up properly you will have none of these problems and you don't need any washers or shaved primers pins to make it work right. RCBS has made millions of dies and 99.98% of them work just fine. Follow the steps EXACTLY and I bet it works just fine.



I am not trying be give you a shot but from your writing it would appear written English may not be one of your strengths. If you can't get the sizing die set up right DO NOT LOAD any live ammo until you can work with someone who can show you how to do it correctly. Loading done wrong can be very dangerous to you and bystanders. Where are you located?



Yeah I know what u are saying that is very dangerous, it is not my first time reloading it's just with this caliber that I seem to have trouble with I followed the instructions exactly and it just didn't work I tried setting it tighter so screwing it in farther but that didn't help either.
I know what ur saying though loading is extremely dangerous if done wrong I was just try something to not have to push unused primers that's why the washer thing epic fail


Sent from my iPhone using Tapatalk

[jdf96ca]

To add to that I don't recommend to any one to fool around with the dies you should "if ur dies don't work" just pic up a new set and do it right right away


Sent from my iPhone using Tapatalk

[gitrdun]

To add to that I don't recommend to any one to fool around with the dies you should "if ur dies don't work" just pic up a new set and do it right right away


Sent from my iPhone using Tapatalk

Wrong. There is something wrong with your set up. In the pics that you've posted, I see a lock washer, other washer etc. in the background. If you are in the Calgary area, I'd be willing to help you out. But you'd have to drive south a bit. :)

[jdf96ca]

Wrong. There is something wrong with your set up. In the pics that you've posted, I see a lock washer, other washer etc. in the background. If you are in the Calgary area, I'd be willing to help you out. But you'd have to drive south a bit. :)



Hahah those r not for reloading lol I'm not I'm from Slave lake


Sent from my iPhone using Tapatalk

[gitrdun]

Hahah those r not for reloading lol I'm not I'm from Slave lake


Sent from my iPhone using Tapatalk

Well, I'm sure that you could find someone in Slave Lake to steer you in the right direction. You do need to seek some help. :)

[jdf96ca]

Looks like the expander button is far to high up inside the die. The neck is getting jammed between the button and the neck portion of the die crushing the case. If you want to resize primed brass without removing the primer you have to take the pin out of the expander button, backing it off so the pin doesn't decap the primer puts the button to high in the die and jambs the neck crushing the case.



Ok thx a lot for that I ended up doing that and it worked great for me


Sent from my iPhone using Tapatalk

[jdf96ca]

Well, I'm sure that you could find someone in Slave Lake to steer you in the right direction. You do need to seek some help. :)



I don't see why I should; doing that was purity much an experiment, and bra I got a few reloading buddy's up hear any way thx aloe though guys u have helped me some buddy's


Sent from my iPhone using Tapatalk

[gitrdun]

I don't see why I should; doing that was purity much an experiment, and bra I got a few reloading buddy's up hear any way thx aloe though guys u have helped me some buddy's


Sent from my iPhone using Tapatalk

Sounds good, I'm done trying to help you out. Sounds as though you've got everything under control. :scared0018:

[jdf96ca]

Sounds good, I'm done trying to help you out. Sounds as though you've got everything under control. :scared0018:



Hahah I did so far [emoji51] but thx guys I appreciate it [emoji1417]


Sent from my iPhone using Tapatalk

[gitrdun]

Hahah!

[mgvande]

I'm liking how this is the most popular thread right now in this section. I must admit, the nonsensical title and a little bit of curiosity got me.

[jdf96ca]

I'm liking how this is the most popular thread right now in this section. I must admit, the nonsensical title and a little bit of curiosity got me.



Was kinda surprising to me as well that is is actually the most popular hahah kinda funny


Sent from my iPhone using Tapatalk

[jdf96ca]

Kinda awesome To though at the same time


Sent from my iPhone using Tapatalk

[The Flint&Fly Guy]

I'm gonna post a bit of summary to help make this plainer.
The cartridges that were being worked with are 25-06, the die is a lee collet neck sizer. The first time these shells were sized they where not primed. But alas, Murphy was present and the instructions for the seating die (1/4 turn) were followed, rather then the sizing die (full turn). This mistake went unnoticed until the bullet seating stage. In an effort to save the primers the modification with the washers to suspend the depriming pin was formulated. DEFINETLY an EPIC fail! A better idea was to pull the pin out of the sizing stem. This done the shells were properly sized and loaded.
A serious mistake with strange looking results, but thankfully resolved back to normal. As to the danger of it, for sure reloading mistakes have terrible potentials, but this was not to bad since the neck sizing die doesn't effect headspace or anything thing critical other than bullet tension.


Sent from my iPhone using Tapatalk

[gitrdun]

Or get a de-capping die.

[mgvande]

I love my lee decapper. I bought 2 one I modified for the fat BPCR cartridges.

[mgvande]

Like I said sorry


Sent from my iPhone using Tapatalk

It's fine. But expect criticism from alta270. He is on a spelling, grammar correcting spree.😊