Need help with 2005 Honda rincon 650

[carlson]

Well last weekend I had a fuel line melt against my exhaust. I started to take the panels off today and trying to figure out where the other end of this line goes. Does anyone have a rincon 650 that could either send me a picture or if local to Edmonton let me come and take a quick look at your machine? The line in question comes right off the bottom of the carb pictured here, and is the one that is sitting on the exhaust filled with silicone. The line can be seen from the drivers side of the machine without taking panels off

http://i409.photobucket.com/albums/pp172/carlsongt/F5B918F7-E45F-4DAF-B634-4C3DB28792E3.jpg

Thanks in advance

[gmcmax05]

That's just a drain line from the fuel bowl.

[carlson]

Just a drain? It's ****ing fuel out weather the machine is running or. And when the fuel is shut off

[HVA7mm]

The float is probably stuck, or less likely has a hole in it. Take the float bowl off and give it a good cleaning, and the leaking should stop.

[carlson]

The float is probably stuck, or less likely has a hole in it. Take the float bowl off and give it a good cleaning, and the leaking should stop.

Thanks! I'll take it off in the morning and clean it. I was just reading other forums as well of guys having the same problem and others said to give it a good cleaning.