PDA

View Full Version : Pontoon system for Quads


SDKiller
07-25-2019, 09:15 AM
Sparx,
I have seen a few different versions over the years, a guiding outfit had a similar set up in the states back in 2008 but it didn't take off either, hard to pack the bigger bulky pontoons so I went with the inflatable system. When I did the initial water testing I challenged 5 of my buddies to get onto my quad in the water and try and flip it, (Outlander MXR 1000) No matter how hard they tried they couldn't flip it, it was actually quite comical!! There is absolutely no stability issues at all. When I applied for approval from Transport Canada one of their requirements was to do a stability test. I had to load the front rack, back rack, left and right footwells (Independantly) with as much weight as I could to get the pontoons submerged level with the water surface. I couldn't get enough weight on the Quad to even accomplish this. (Not enough room to stack the weights) and I didn't want to damage my Quad racks lol. It's rated for 1650lbs safe working but capable of more. The whole system was designed to be user friendly, compact, (no piece is longer than 36" and no wider than 21") The pontoons have 3 chambers and separate valves etc. Installing it and taking it off every 20 minutes was not the idea but getting to that remote lake and spending the day there fishing was the goal. Dropping that prize animal in water would be a breeze to recover, not to load it on the water but to tie a rope onto it, get back to shore, and then use your Quad to pull it out was more what I was thinking. I too have owned two Argos, both fully loaded Conquests. Virtually unstoppable with tracks and proper maintenance but unfortunately not great in deep water especially if the wind picks up! Although all machines have their great qualities, sadly not one can do everything haha!! Thanks for the feedback!! I will be showing the system at the Grande Prairie hunting show in October as well!!

Thanks,
Darrell Grove
Water Traxx Inc.
www.watertraxxinc.com