Zip-in-Z
04-21-2020, 01:22 PM
While at home in lock down, designed & completed my disk/stopper project for my b-new 10" StrikeMaster auger & Milwaukee Fuel M18 drill.
Found a 14"x17" HD black poly kitchen cutting board at Walmart, made mine 12" in dia using a Dremel rotary saw.
Used angle grinder and cut off 10" off the top spiral to reduce some weight & would never need to cut through 2 feet of ice.
Used two 1" double split shaft collars to hold it in place.
Used 2 1/2" hole saw & made 5 cut outs to reduce weight & easier to hold on to when lifting the auger out of the hole/ice.
Sylvan still has lots of ice, went out to field test it, new auger with Milwaukee M18 cuts 10" double overlapping holes with little effort.
Total weight is just over 10 lbs .....
Project #2 is a 5" IceBerg Mini auger converted to work with the M18 Drill, light weight & cuts fast, mainly use it to drop the camera down to find the spot-on-the-spot structure.
A bunch of pic's .... click on them to enlarge.
Cheers
David
https://i.postimg.cc/LhHFhb0C/Patient.png (https://postimg.cc/LhHFhb0C)
Project #1 - 10" Auger Disk.
https://i.postimg.cc/pmnK8k14/P1050400-1.jpg (https://postimg.cc/pmnK8k14)
https://i.postimg.cc/nCXmb0Zr/P1050407-1.jpg (https://postimg.cc/nCXmb0Zr)
https://i.postimg.cc/zV4gJKXj/P1050411-1.jpg (https://postimg.cc/zV4gJKXj)
https://i.postimg.cc/w1Js3M1d/P1050430-1.jpg (https://postimg.cc/w1Js3M1d)
https://i.postimg.cc/mhX95KvK/P1050534-1.jpg (https://postimg.cc/mhX95KvK)
https://i.postimg.cc/Z0K3jJMr/P1050539-1.jpg (https://postimg.cc/Z0K3jJMr)
Project #2 - 5" Mini Auger Conversion.
https://i.postimg.cc/xcKqv73w/P1050365-1.jpg (https://postimg.cc/xcKqv73w)
https://i.postimg.cc/FYpRqLqG/P1050367-1.jpg (https://postimg.cc/FYpRqLqG)
https://i.postimg.cc/qtZ7Bdp3/P1050371-1.jpg (https://postimg.cc/qtZ7Bdp3)
https://i.postimg.cc/bdnvPMWZ/P1050425.jpg (https://postimg.cc/bdnvPMWZ)
No Difficulty Drilling Overlapping Holes
https://i.postimg.cc/xNdDXXgj/P1050376-1.jpg (https://postimg.cc/xNdDXXgj)
Found a 14"x17" HD black poly kitchen cutting board at Walmart, made mine 12" in dia using a Dremel rotary saw.
Used angle grinder and cut off 10" off the top spiral to reduce some weight & would never need to cut through 2 feet of ice.
Used two 1" double split shaft collars to hold it in place.
Used 2 1/2" hole saw & made 5 cut outs to reduce weight & easier to hold on to when lifting the auger out of the hole/ice.
Sylvan still has lots of ice, went out to field test it, new auger with Milwaukee M18 cuts 10" double overlapping holes with little effort.
Total weight is just over 10 lbs .....
Project #2 is a 5" IceBerg Mini auger converted to work with the M18 Drill, light weight & cuts fast, mainly use it to drop the camera down to find the spot-on-the-spot structure.
A bunch of pic's .... click on them to enlarge.
Cheers
David
https://i.postimg.cc/LhHFhb0C/Patient.png (https://postimg.cc/LhHFhb0C)
Project #1 - 10" Auger Disk.
https://i.postimg.cc/pmnK8k14/P1050400-1.jpg (https://postimg.cc/pmnK8k14)
https://i.postimg.cc/nCXmb0Zr/P1050407-1.jpg (https://postimg.cc/nCXmb0Zr)
https://i.postimg.cc/zV4gJKXj/P1050411-1.jpg (https://postimg.cc/zV4gJKXj)
https://i.postimg.cc/w1Js3M1d/P1050430-1.jpg (https://postimg.cc/w1Js3M1d)
https://i.postimg.cc/mhX95KvK/P1050534-1.jpg (https://postimg.cc/mhX95KvK)
https://i.postimg.cc/Z0K3jJMr/P1050539-1.jpg (https://postimg.cc/Z0K3jJMr)
Project #2 - 5" Mini Auger Conversion.
https://i.postimg.cc/xcKqv73w/P1050365-1.jpg (https://postimg.cc/xcKqv73w)
https://i.postimg.cc/FYpRqLqG/P1050367-1.jpg (https://postimg.cc/FYpRqLqG)
https://i.postimg.cc/qtZ7Bdp3/P1050371-1.jpg (https://postimg.cc/qtZ7Bdp3)
https://i.postimg.cc/bdnvPMWZ/P1050425.jpg (https://postimg.cc/bdnvPMWZ)
No Difficulty Drilling Overlapping Holes
https://i.postimg.cc/xNdDXXgj/P1050376-1.jpg (https://postimg.cc/xNdDXXgj)