View Full Version : Charging Deep Cycle Batteries
Sparkle
06-14-2020, 10:13 AM
I have a battery charger that has a few 6v and 12 volt settings. For charging my deep cycle battery should I be using the 12V 2AMP or the 12V 15AMP setting. Thanks guys .
tallieho
06-14-2020, 10:18 AM
21v 2amp...Never run it completely down.Bitch to get them to recharge
Pierre
06-14-2020, 10:47 AM
If you need to charge them quickly, you can use the 15amp, they will charge to about 80%, after that use the 2amp, If you're in no hurry, then use the 2amp as Tallieho said.
YeeHaw
06-14-2020, 10:56 AM
2 amp, always best to charge low n slow
Sooner
06-14-2020, 12:28 PM
I generally do 4 to 6 hours on the higher amp to get things going, then drop it to the lower setting for the rest of the day and part of the next.
pikergolf
06-14-2020, 04:43 PM
Low and slow is the best way. Also get it on charge as soon as you can, the sooner the better.
daveyn
06-14-2020, 05:06 PM
on a related question, I have a set up with 2 6 volt batteries and have been charging them seperately on the on the 6 volt setting. Wondering if I leave them connected could I charge them on the 12 volt setting ?
pikergolf
06-14-2020, 06:25 PM
on a related question, I have a set up with 2 6 volt batteries and have been charging them seperately on the on the 6 volt setting. Wondering if I leave them connected could I charge them on the 12 volt setting ?
Yes they can be charged in series.
vBulletin® v3.8.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.