Sako m995 Trg questions

[360hunt]

Outdoorsmen

I'm familiar with sako 85 and 75 rifles but not so much the M995 trg rifles. I do know they are sought after and collectible. My question is about action lengths. Happen to have one in 338 win mag that's in good shape. From what I can tell it was made in one action length, all calibers chamber in it.
I've seen this model chambered in 338 lapua.
Does anyone know if there was a lapua action? Or as said all one action for calibers? If it is all one action length. Anyone re barrel to 338 lapua and have feed back.
Cheers 360hunt

[marky_mark]

You would need the bigger bolt face for the lapua

[360hunt]

You would need the bigger bolt face for the lapua


I dont believe that would be a problem.
I have an excellent gunsmith to open the bolt face. Just pondering action lengths
Thanks

[fps plus]

Options also 340 Wby mag , 338 RUM

[marky_mark]

My fierce 338 lapua, sako clone, has an ejection port that is 3.688” long

Another option is a 338 Norma. The normal or improved version. Or even a 338 rum and keep the same bolt face

[360hunt]

I should have done this long before posting on the forum. The magazine length I just measured is huge!
3.797" I would think that speaks for itself.
Large than 338 lapua specifications

[raised by wolves]

The 995s came out in both standard and magnum cartridges including the 338Lapua. Nice rifles but very different from the 75s and 85s. I did not own a 995 but I had a few range days using my buddy's rifle. I found them heavier than the 75/85 lines. I liked the bolt and cycling action, very smooth but again very different from the 75/85. Handled well and was sub MOA with factory ammo. I would not hesitate to own one if a deal were available. Never heard any complaints from my buddy about his rifle. I believe the action is the same being used on the current TRG 42.