Eskimo Shark Z71 Blade Sharpening

[Vapor]

Anyone know who could sharpen the blades for my Eskimo Shark Z71 in the Calgary area? Thanks! :)

[-JR-]

I seen a video on how to sharpen steak knifes for home owners that don't have sharpeners . They use the bottom side of a coffee cup.
I kind of laughed and grabbed a steak knife and it worked ! Lol

[JareS]

Take it to the fella in Bowness. Best 20$ you'll spend. All old school machines in his shop.

He sharpened my Z71 blades, better than factory.

[Elchinodiablo]

Hi tech services. Airdrie.

Sent from my SM-G991W using Tapatalk

[Vapor]

I seen a video on how to sharpen steak knifes for home owners that don't have sharpeners . They use the bottom side of a coffee cup.
I kind of laughed and grabbed a steak knife and it worked ! Lol

Sounds like a job for MacGyver! lol

[Vapor]

You wouldn't happen to know the name of the place by chance? It looks like there's at least 2 of them in Bowness.

Take it to the fella in Bowness. Best 20$ you'll spend. All old school machines in his shop.

He sharpened my Z71 blades, better than factory.

[JohnB]

I was researching on how to sharpen the blades off my Ion auger. One guy used a Work Sharp knife sharpener, he pulled the blade guide off and just ran the blades across the belt very lightly following the angle of the Ion blades.

I gave it a try with worn out medium grit belt, work great. If I had someone local to sharpen them I would have brought them in.

I did buy some new blades in case I messed it up. I compared the new blade to the ones I sharpened and drilled some holes with both. The ones I sharpened were very close to the new ones.

[JareS]

You wouldn't happen to know the name of the place by chance? It looks like there's at least 2 of them in Bowness.


Carbide Saw Service, 6527 Bowness Road NW

[stein]

Carbide Saw Service, 6527 Bowness Road NW

2nd for Carbide Saw, did a really good job on my SM curved blades

[kevinhits]

Foothills Sharpening in Okotoks. Been going there for years now. Take all my blades and knives there. Great guys to deal with.

[Vapor]

Awesome, Thank you!!

Carbide Saw Service, 6527 Bowness Road NW

[old dog]

X3 for carbide saw services in Bowness. He does my strikemaster blades, which are curved and not easy to do properly.

[Tigger72]

+2 for Brent at High tech Services

[calgarygringo]

As mentioned Foothills sharpening in Okotoks for the deep south guys and Carbide for the NW guys. There is one in the NE too but I cant recall the name. All do a great job on those blades. Best money you will spend all season.

[Frank_NK28]

X3 for carbide saw services in Bowness. He does my strikemaster blades, which are curved and not easy to do properly.

How do they perform afterward?

[old dog]

I honestly can’t tell the difference between them and a set of new blades.

[haywire]

+2 for Brent at High tech Services

+ 3 for Brent at high tech in Airdrie, does an amazing job and next day service if not same day !!