Alberta Outdoorsmen Forum

Alberta Outdoorsmen Forum (http://www.outdoorsmenforum.ca/index.php)
-   Guns & Ammo Discussion (http://www.outdoorsmenforum.ca/forumdisplay.php?f=6)
-   -   Bore Guide for CZ 455 17 HMR (http://www.outdoorsmenforum.ca/showthread.php?t=361076)

PaintearthCounty 03-19-2019 11:48 AM
Bore Guide for CZ 455 17 HMR
 
I’m looking for a bore guide for my CZ 455 17 hmr , anyone have any suggestions where I might be able to get one , Thanks

Dmay 03-19-2019 12:06 PM
I got mine from Loweyproducts dot com.

Groundhogger 03-19-2019 01:28 PM
Contact Nordic Marksman in NS. I got mine there, but they deal directly with the manufacturer too. I needed one for my CZ527 in 17 Hornet, Nordic had them custom make me one, I don't think it cost any more than an off-the-shelf bore guide!

Anything rimfire-related (especially cleaning stuff) I contact Brad @ Nordic. I've yet to meet anyone who knows more about it.

Smokinyotes 03-19-2019 03:27 PM
I got mine from Sinclaires

Big Sky 03-19-2019 04:30 PM
Yo Dave sells the cz bore guides. Canadian company.
Brownells sells them for many different makes.

Yo dave also carries a nifty little bolt disassembly tool.

aardvaark 03-22-2019 11:21 PM
When you say bore guide, is that the piece that you put into your mag to make it a single shot ? I’ve got a cz527 in 17 Hornet and it is really ugly to get it to feed. Takes a sliver of brass off each round or a deep gouge into them. Main reason why I rarely use it. And just about impossible to get a round into the chamber without using the mag. I’ve taken it apart, lightened the mag spring, sanded the edges, and it’s better, but an awful long ways from Tikka smooth.

AndrewM 03-23-2019 08:36 PM
Quote:
Originally Posted by aardvaark (Post 3951025)
When you say bore guide, is that the piece that you put into your mag to make it a single shot ? I’ve got a cz527 in 17 Hornet and it is really ugly to get it to feed. Takes a sliver of brass off each round or a deep gouge into them. Main reason why I rarely use it. And just about impossible to get a round into the chamber without using the mag. I’ve taken it apart, lightened the mag spring, sanded the edges, and it’s better, but an awful long ways from Tikka smooth.
No it’s the piece you shove in the action to protect it while cleaning.

6.5 shooter 03-23-2019 09:17 PM
Quote:
Originally Posted by aardvaark (Post 3951025)
When you say bore guide, is that the piece that you put into your mag to make it a single shot ? I’ve got a cz527 in 17 Hornet and it is really ugly to get it to feed. Takes a sliver of brass off each round or a deep gouge into them. Main reason why I rarely use it. And just about impossible to get a round into the chamber without using the mag. I’ve taken it apart, lightened the mag spring, sanded the edges, and it’s better, but an awful long ways from Tikka smooth.
NO ....BUT to solve your problem contact James Calhoon in Montana. I just bought my second one from him. Best single feed adapter on the market for the CZ 527 action. Made from out of steel will last several life times. $103. bucks delivered to my door including the ex obedient exchange rate, About 2 weeks for delivery


All times are GMT -6. The time now is 10:45 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.