Thompson Center Trigger Pull
Does anyone know who might be able adjust or downsize the trigger spring in a T/C Encore pro hunter rifle. Or where I can find a trigger spring in Alberta.
5# pull right now looking for 2-3# if possible. |
search mike bellm online, he'll send you a manual along with the modified spring of your liking. Its from the states, but now worries in getting it here. Its a relatively easy changeover.
|
Thanks ordered a #3 spring kit for 2.2-3.5 # trigger pull.
|
be very carefull as the springs give out different trigger pulls in different guns.
i would order at least 3 springs 1 below and 1 above the pull you want. |
No problem, I ordered the same one you did. Also order the stiffer lock up spring and size up the hinge pin, it really makes the lockup snap and keeps it tighter. It feels like a quality piece of work after that. You should be ok with the #3 kit without having problems.
|
All times are GMT -6. The time now is 10:38 AM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.