25-284 project
The 25-284 is underway. The doner pre 64 action is apart , trued , cleaned, . Barrel is set up in the lathe and the chamber and thread tenon approx 90% done . The throat will be lengthen to accommodate seating bullets out
|
What twist? It should be a very impressive cartridge. I would imagine velocity should be similar to a 25 Gibbs which isn’t a bunch slower than a 257 wby but uses significantly less powder.
Will you have to turn necks? |
It’s a Douglas barrel 1-10 twist. Reamer is a no turn neck . I’m expecting 25-06 velocities .
|
The feed cone is cut , just have to locate the extractor cut and mill it out .Then engrave, blue and do a little fitting into the stock.
|
Make sure you post some pics when it’s done.
|
I will have to learn how to post pictures
|
25/284 pics
These are the components for the 25/284 rifle that fps plus is building
Cat https://i.imgur.com/VW6VxiY.jpg https://i.imgur.com/bl6Fzfl.jpg https://i.imgur.com/ywwgwhd.jpg |
Very nice wood. Should be a heckuva deer/antelope gun
|
|
Nice Project :) 110 Accubond will make a Nice killing load from that cartridge RJ
|
To try:
90gr x 90 Hornady gmx 100 Sierra 100 speer 115 partition And variety of lightweights but probably won’t get used |
|
The 25-284 is done. I have a Leupold VX5. 3-15 to mount and test fire . Possibility to make the range today if the stars align .
Thx to Cat for posting my pictures |
Quote:
|
all set !
|
On a short action
There's the .25 Humdinger. 25-06 velocities on a .243 improved parent case.Wildcats may not always be practical but have a certain unique cool factor.
|
Quote:
If guys can identify as girls and girls identify as guys , my 25-284 can identify as a 25-06! |
Quote:
I stopped at the 257 Roberts for all my 25cal thrills. |
Quote:
But as you say gotta do loonie |
Got a chance to fire form some brass today , using 100 gr Sierra and H-4831. Definitely showing promise , unfortunately the battery was dead on my chrono so no velocities .
|
First group
|
Happy so far with the results as it was a light load for fire forming and was cleaned after each shot. Hopefully 100 barnes x , or 115 partition or 90 gmx will work in this rifle . Now that I have some brass fire-formed I can try those .
|
Tried some H4831 SC with a moderate load and velocities were comparable to 25-06. Accuracy wasn’t were I wanted to be.
Gonna cross reference 6.5 -284 data to utilize more powder info . |
Quote:
|
I would like to work with barnes 100 x bullet. I would like to see if 6.5 stabil powder maybe compatible
|
25-284
Quote:
|
Quote:
|
All times are GMT -6. The time now is 10:20 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.