Leaupold vendetta mounting hardware
 

I bought a used leaupold vendetta the other day online, the guy told me that all the hardware was there.... well if wasnt . Anyone have or know where a guy can get some mounting hardware so I can get it on my bow?

Is it all missing or just some of it?

You could try calling Korth Group and see if they have anything.

Looks like I'm missing the piece that attaches to the bow its self and then the piece that allows it to go left and right. I have the piece that adjusts it up and down

I have a Vendetta can you post the pic of exactly what you have? Why not ask the seller to send the remaining pieces if he said he had everything.

Ya I did ask him. He said that's all he used to put it on his bow and that he redneck mounted it with tape.

Picture Attached
 

I never liked the factory mount so in my opinion you’ve got what you need. If your even remotely mechanically inclined you can bolt it up to your sight housing and move the vendetta in tight to your riser. You may need to use a little bit of flat steel and drill some holes to make it work but it will be solid. Moving it helps with the weight distribution and torque from my experience.

When I shot a Hoyt I managed to mount it further forward then my current strother. Here’s a pic of the Hoyt, I know the quality sucks but the photos old.

https://uploads.tapatalk-cdn.com/202...78090a745c.jpg



On my strother it’s mounted here. Once again bolted to the sight and I could get better pics in two weeks when I’m done work but this is all I’ve got for now. It only takes a few minutes to visualise where you want it and what you need to build to make it happen.

https://uploads.tapatalk-cdn.com/202...5e5e7e0923.jpg

I recently purchased an Eagle-6C Compound Crossbow for outdoor games and target practice.
https://img.letgo.com/images/56/f5/d...cy=img_600_pwa