4 VS 3 VS 2 VS 1 piece rods
Guys/Gals,
There are varying opinions of how many sections a rod should have. Each of them has advantages. One piece rods are the best of the lot. They don't have any flat spots that change the rod action but they are tough to carry around Two piece rods are a slight compromise. There is some lose of action but the rods it a whole lot easier to pack around. Three piece rods are again a compromise with the only real advantage are length of rod case. Four>5>6 piece rods are by in large specialty rods where rod action is compromised for other considerations - flying the rod or backpacking. Multiple piece rods use ferrule systems that set up "dead spots" along the rod shaft. The designer, in as much as possible, changes the taper to alleviate the problem. However, no matter his skill, the dead spots remain. By the way - generally the cheapest and most expensive rods are 2 piece. The choice is yours. catch ya' Don |
I take it you fish mostly 2 piece and 1 piece bamboo? What lengths and what are your go to rods? Lakes? Small streams? etc
|
I find it amusing the manufactures push one piece as the got to have rod for sensitivity etc. yet when it comes to fly rods they claim nothing is lost going to a four piece. I do believe the four piece are way cheaper to produce as it's far easier to make a nice straight two and a half foot section than a five foot section. Having said that, fly rods are a casting tool first and sensitivity doesn't really factor into it, but I still would prefer a two piece over a four piece.
|
I dont have a ton of time with one piece or many piece rods, hiking with a one piece rod is a pain, setting up the multiple section rods can be time consuming . imo two piece are the best compromise, sensitivity and mobility. ime set is not a pain and 4'sections dont get too annoying when traveling thru dense brush. just my thoughts.
|
BBT,
Of the <>40 fly rods hanging around here, I have 2 that are multipiece. A 8'6" 6 wt. 5 pc that back packed when my knees still allowed that and a 4 pc. 2 tip 7'6" 4 wt. bamboo rod that was built from off-cuts just to see if I could do it. The bamboo rod went to Great Slave Lake last year for the grayling. It was used to landed a 25" fish. I have no 1 piece rods. Built one once - broke it and that ended that silliness. The rest are mostly 2 pc. rods. The bamboo rods are fished when the lure weight allows it. A 6 wt. rod is the heaviest I build. When fishing bass poppers/sliders/Clousers for either bass or pike I use graphite rods in 8 wt. or greater. For trout sized flies, bamboo works just fine. The rods I regularly use vary from a 6'0" 2 wt to 8'0" 6 wts. And pikergolf, It take a lot more effort to make 3 or 4 piece rods. Effort translates to labour costs and $'s. Plus in the case of bamboo- extra ferrules @ $50 a set. catch ya' Don |
Quote:
|
I personally find that 4 piece are excellent fly rods. I even fish a 7 piece orvis when hiking into more remote lakes. I do own 2 piece rods, and they are just annoying to carry around
|
Thanks Don
|
Hope im not stealing the thread,its sorta on topic.
While we are on the topic of 4 pce rods. Is there anywhere a guy can get a nice rod sock for one with out having to order off the net? My new rod only came with a tube with reel holder included. To clumsy to pack with. Maybe someone custom makes them around Alberta. Stores dont seem to have much.
|
Have a few dozen rods, Bamboo and none. I have a 6ft one piece Lee Wulff bamboo that will lay down a dry fly light as a feather. An 8 foot red wing and 7 foot south bend (3 piece) that will handle bass bugs and poppers on some of my small mouth jaunts with no problem. I unfortunately havn't had a chance to cast with one of Dons fine creations. My 4 piece sticks are plastic rods (Loop Opti Stream etc) that I can put into an overnight bag. They all are different and all cast great. I think I prefer a two piece if given the choice but they are all sticks for different purposes.
|
I have one you can have. It's a sage 4 piece. It's yours with a $10 food donation to your local food bank!! Let me know...
Peter Quote:
|
I myself am partial to 2 piece rods. I don't backpack into remote lakes anymore and if I did, I would figure out a way to pack my 2 piece in. All of my rods have cases, so that isn't the issue there. What I like about 2 piece rods is if I am fishing more than one stream in a day, when I get back to the truck, I just let out some slack line and take the rod apart with my choice of fly still attached instead of taking everything apart for the short drive to the next stream. When I get there, just put the rod back together and I am back fishing a lot sooner than having to rig everything back up again. Works for me anyhow.
|
Quote:
|
Quote:
I don't find 2 piece rods a pain to carry when backpacking, I have sturdy rod cases for them and I use the case as a walking stick as I hike. If I take more than 1 rod (which is hardly ever) I simply lash the second one to the pack. The other thing I dislike about multiple section rods is that you have to check more than one connection as your fishing throughout the day to make sure they are not coming loose. I only have one four-piece rod, but this happens regularly and chaps my ass! |
Quote:
|
Sorry Jay,
Too slow!! P |
Quote:
HK |
Come on HeavyK, put some incentive for dontaions towards the foodbank (or another charity)!! I think there is a pay it forward thread some on here, ain't there!!
P |
Food bank donation?! Why, that's institutionalized charity! That there sorta thinking is gunna get me lambasted on this kinda forum!
hk |
Quote:
|
That's why I put in the caveat "or another charity"!!
LOL P Quote:
|
Quote:
|
Quote:
|
All times are GMT -6. The time now is 12:32 AM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.