Alberta Outdoorsmen Forum - Loctite On Carberator Mounting Bolts

Alberta Outdoorsmen Forum (http://www.outdoorsmenforum.ca/index.php)

- Fishing Discussion (http://www.outdoorsmenforum.ca/forumdisplay.php?f=4)

- - Loctite On Carberator Mounting Bolts (http://www.outdoorsmenforum.ca/showthread.php?t=339930)

Jawjacker

02-23-2018 08:22 PM

Loctite On Carberator Mounting Bolts

Guys is Loctite required on Eskimo auger carburetor mounting bolts?

Xbolt7mm

02-23-2018 09:36 PM

Quote:

Originally Posted by Jawjacker (Post 3738242)

Guys is Loctite required on Eskimo auger carburetor mounting bolts?

gtr	02-23-2018 09:39 PM

Quote:

Originally Posted by Jawjacker (Post 3738242)

Guys is Loctite required on Eskimo auger carburetor mounting bolts?

Not required, but won't hurt anything.

saddleup

02-23-2018 09:54 PM

If you do use Loctite, use the green or blue, not the red as you will never get the carb off again.

Xbolt7mm

02-24-2018 09:14 AM

For what reason do you think you need locktite??

petew

02-24-2018 09:28 AM

Go with a loc washer and flat washer .

YeeHaw

02-26-2018 04:01 PM

Not mandatory but I give almost any bolt thats subject to vibration a shot of blue loctite just as a precaution.

Jawjacker

02-27-2018 02:17 AM

Quote:

Originally Posted by Xbolt7mm (Post 3738450)

For what reason do you think you need locktite??

The two bolts holding the carb on had a blue colored substance on the bottom of each bolt.

All times are GMT -6. The time now is 04:52 PM.