Quote:
Originally Posted by Czech1
just purchased a Masterbuilt propane smoker"Seems Myself and few have a problem getting and keeping temperature lower like 220 .Lowest setting on controller'vent open wide.Any others who also have this problem,with any fixes?
|
My Smoky Mountain propane smoker controller is Off-High -Med-Low.
Low is way too hot
So I visually set the flame height by opening the door and setting it to high and then slowly feathering it towards Off.
You should be able to find the sweet spot where the burner is hot enough to make smoke-but much lower than 220F.
Then mark it with a Sharpie