Quote:
Originally Posted by FCLightning
Have that same hoist. I mounted a length of square tube using 1/2" redi rod through the beam in the ceiling. Then I attached to hoist to the square tube as shown in your diagram.
|
I was thinking the same thing.
Did you drill holes in the square tubing sized appropriately for the ready rod?
Does the square tubing sit right again the wood or did you leave a gap so you can slide the hoist?
The only problem is you need to have access to the top of hoist with no interference so you can fasten/turn the bolts into the threaded part.
I actually bought two hoists so i can hang a couple animals if needed.