Quote:
Originally Posted by slough shark
".. It all went down on less than a tank of gas and then at oil is always full when I start. Yeah the brake diagnosis is bunk, no sign of heat on the spring, as far as their other possible diagnosis with it being overheated due to using the teeth on front if that does in a saw they need to design a better saw.."
|
Curious, did you use gas pre-mix 50:1, or those cans stores sell for $9.99 that are mixed?
I ask because I bought one of those premix cans from C.tire in July for my Husky 55, filled tank,
started cutting for approx. 30secs & all of a sudden the engine got hot, heavy sounding and signs of
a piston seizing were present. Shut off, pulled plug, sure enough, plug was very white. I sprayed
WD40 into hole & slowly cycled piston, let it sit & cool. Dumped the premix, mixed up a fresh batch of
regular gas oil, fired right up and has been fine ever since. So i don't buy those premix cans from CT,
only from a authorized Husky dealer now!