Quote:
Originally Posted by brewster29
I would like to try it but it's not available anywhere...just like most powders.
|
I have used it in my 280 AI, I don't have the recipe handy but as I recall I am up to approximately 2 grains over Hodgins maximum recommended load with no pressure signs yet.
Nosler brass, Fed 210 primers, seated approximately 0.100" off the lands, 3005 FPS as I recall and just less than half inch groups at 100 m, 24" barrel
Excellent powder, meters very well and very easy to work with. One caution is that at least for the 280 AI it doesn't start to really excel until you get close to or just over the maximum recommended load so be careful with it.
It's deceptive in that you think you are going to be getting pressure signs when none are there.