Quote:
Originally Posted by AlbertanGP
|
Well got the sled to an acceptable starting point as I know there will be more mods but good enough for now.
The tote was drilled and bolted to the LinQ flat base, had to disconnect it to ensure when I drilled etc I was missing the rear lights wires etc,
Took off front and back seat then the storage box under the back seat to be able to move the LinQ base to have easier access to install the hardware, could have used a third hand a few times but managed to bolt it down securely and reinstall the base, storage box,front seat and back seat.
Then installed the kolpin grips which are a great product, can swivel to accommodate various configurations and be removed when not in use.
I got a tote that still allowed a small area of open space to for gas, chainsaw etc.
Three hour project but we’ll worth it.
Nut,lock washer and washer underneath.
Inside of tote
Installing LinQ base back on
Seats etc all installed
Finished product!
Sent from my iPhone using Tapatalk