View Single Post
  #9  
Old 01-06-2016, 05:26 PM
Dick284's Avatar
Dick284 Dick284 is online now
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,629
Default

Quote:
Originally Posted by biggelaar22 View Post
I would not bother with any 4895 (hodgdon or IMR) for 150 grain projectiles. I find that H4350 works best for 150/165 grain projectiles. It fills the case a bit more than IMR 4350 and produces similar velocities, along with good accuracy.

If you must know, I have used H4895 in the 30-06 but I paired it with a 125 grain Ballistic Tip. I find it works best in this pairing than with a 150 grain BT. This may be a good option for the 223, if you are looking for a one powder fits all kind of a deal. Powders like Varget, 4064, etc would work here as well. It all depends on your preference and what the desired outcome is from the reloads.

Check Hodgdon's load data, see if there is any data that may be useful to you.

Good Luck

I concur.

Except, if a M1 Garand is involved.
Then stick with the 4895.

As an aside.
I'd be looking at Swampdonkeyoutdoors, ad in the buy sell, they have powder.
__________________


There are no absolutes
Reply With Quote