View Single Post
  #14  
Old 02-22-2018, 10:14 AM
abhunter8's Avatar
abhunter8 abhunter8 is offline
 
Join Date: Sep 2007
Location: Drayton Valley, AB
Posts: 693
Default

Quote:
Originally Posted by Scott N View Post
Lots of variables involved, but once you have brass and the reloading equipment, the cost isn't too bad.

Pick an average .264 bullet and you'd probably pay roughly $40 / 100 bullets = .$40 / bullet.

Primers - $7 / 100 = $.07 / primer

Powder 1 pound = 7000 grains. Pick an average load (I'm going to use 48.0 grains) and you should get 145 loads from a pound of powder.

Rough cost / round is about $.78

I tend to load in batches of 50, which will take me about an hour if I've already prepped / resized my brass.
That's a good breakdown but your cost per bullet is a little low. Any quality .264 bullet, Nosler accubonds, Hornady ELDX, Barnes are more like $45 for 50 or around $85/100. If I could find Sierra gamekings or hornady interlocks could get them for about $50/100 and reduce cost per bullet to about $.80.

I reload for two 6.5 x 55's and my cost is about $1.00 - $1.25 per, depending on the bullets I use.

Last edited by abhunter8; 02-22-2018 at 10:43 AM.
Reply With Quote