Quote:
Originally Posted by elkhunter11
After I pulled some bullets, many years ago, I just ran the primed cases through the sizing die, to resize the necks, and no issues. Then I reprimed the cases with the same primers. I then realized, that I could have just backed off the depriming rod adjustment to resize the necks, without depriming the cases.
Now if you are talking factory loads with crimped primers, I would pull the bullets, pour out the powder, and fire the empty primed cases in your firearm
|
I have to be missing something... why remove the primer and then put it back? Pull the bullet, dump the powder, neck size (or resize without the decap pin), new powder, new bullet... why decap at all?
ARG