I take no responsibility SSH!
I have been doing one thing at a time so I know what was wrong once it is fixed. I cleaned the firing pin and bolt body with no improvement. I was not expecting any doing this.
Removed the ejection pin and spring and cleaned, no fix doing this. This weekend I will remove the extractor claw & clean, thanks for the tips Piker! If this does not work I will try replacing the extractor/ ejector parts that Brewster29 posted! Thank you Brewster for that!
I ran some more ammo through the action and had a 100% ejection rate before firing, after firing that dropped to about 50%.
__________________
There is no God higher than truth - Gandhi
Protect the oppressed even if an enemy, never forgive the traitor especially if he is your friend
|