Quote:
Originally Posted by timbertom
I just finished pillar bedding and added 3rd action screw plus action bedding on 50 cal. savage. did the Tupperware stock as well to see if could improve, filled and stiffened the fore stock on Tupperware and made sure free float . than did the Boyd's as you can see in pictures had to over size pillars as stock holes they did not not mate up with action on Boyd's. Turned them down to 1/2 inch and drilled front and third stock hole 9/16 to get bedding on pillars. Used Devcon for pillars and bedding, tang is not bedded and free floats this 2 step project. Left out the ramrod as I use a 3 piece I carry in my pack. hope posting pics work. have to see how to upload pics first try did not work.
|
picture posts.[IMG]<a href="https://imgur.com/JvqiI31"><img src="https://i.imgur.com/JvqiI31.jpg" title="source: imgur.com" /></a>[/IMG]