View Single Post
  #17  
Old 01-04-2023, 11:51 AM
NorthernFarmer NorthernFarmer is offline
 
Join Date: Jan 2023
Posts: 7
Default

Quote:
Originally Posted by Frost Fighter View Post
If you are getting spark your controller is ok. I would check the ignitor gap at the nozzle. The gap should be approximately 5/32, 1/8 from flat face of nozzle to ignitor rod, 1/4” from centre of nozzleorifice to the bottom of the ignitor rod
I know the nozzel is fine.. I swapped them from unit to unit and they both worked in the working unit.
Reply With Quote