Quote:
Originally Posted by Sitting Bull
Update.
Well I decided to pick up a box of federal blue box factory ammo in order to see if they created the same sticky ejection issues . I also changed my reload brass from Remington to Federal brass . I trimmed the cases to exactly what the factory ammo brass was and also seated the bullets to what the factory ammo was. I loaded up 5 rounds with 42g of H4895 and also 5 rounds of 42.5g .
Factory ammo worked perfectly and the reloads did good as well except for 2 rounds that stuck ever so lightly.
|
If your reloads are stiff going in, maybe your die is not reforming the shoulders back enough and your creating too tight of a headspace. During the shot, the brass will expand to match your chamber under pressure and then shrink after the shot, giving easy extraction (as long as your pressures are happy). Try adjusting your die so your brass will chamber perfect. Also make sure the brass is clean of any sizing lube or dirt.