Quote:
Originally Posted by 260 Rem
snip
I would recommend a Type S Redding FL die
snip
|
A Redding Type S FL die can be used without any bushing as a body only die.
I prefer to FL resize using a Redding body only die,
used with the proper Redding Competition (over height) shell holder, to resize for minimum headspace.
then use a Lee Collet Neck die or a Redding Comp Neck bushing die to size the neck.
Quote:
Originally Posted by 260 Rem
it never hurts to outside turn necks to insure consistent wall thickness
|
Especially when neck sizing using a bushing die without an internal expander.
Good Luck, YMMV.