Thread
:
Flies Step by step instructions Add in your step by step pictures and instructions here.
View Single Post
#
5
11-05-2012, 07:42 PM
Kingfisher
Join Date: Jun 2008
Location: Calgary
Posts: 1,742
Cone Head Sculpin Step by step
One of my favorite sculpin patterns.
Cone head Sculpin
Hook Tiemco 200R or Daiichi 1260 size 8 to 4.
Start with a black cone head. Tie in 2 partridge feathers side by side for the tail.
Tie in a gold rib. Dub some green rabbit fur for the body 2/3rds of the way down the body
.
Put a hot spot of red dubbing at the front of the green dubbing. Then wrap the gold wire rib forward and tie it off.
Spin in some olive green deer hair behind the cone head.
Tie off the thread behind the cone head.
Trim back the spun deer hair. Leaving a sparce bit of the long deer hair on the top and sides.
Trim the bottom of the deer hair so you can see the body and the red hot spot.
The finished Cone Head Sculpin
Rob
Attached Images
Cone Head Muddler 3.jpg
(28.9 KB, 1792 views)
Cone Head Muddler 4.jpg
(28.6 KB, 1789 views)
Cone Head Muddler 6.jpg
(26.4 KB, 1787 views)
Cone Head Muddler 8.jpg
(31.1 KB, 1783 views)
Cone Head Muddler 9.jpg
(37.5 KB, 1777 views)
Cone Head Muddler 10.jpg
(39.9 KB, 1771 views)
Cone Head Muddler 13.jpg
(27.8 KB, 1773 views)
Cone head muddler 14.jpg
(30.5 KB, 1780 views)
__________________
Fishing isn't always about catching fish.
Sometimes you just have to take a deep breath, look around, and admire what mother nature gave us.
Kingfisher
View Public Profile
Find all posts by Kingfisher