View Single Post
  #3  
Old 05-02-2008, 10:19 PM
Bobalong52's Avatar
Bobalong52 Bobalong52 is offline
 
Join Date: May 2008
Location: Drumheller
Posts: 13
Default

"Partly fill the boat with water or float it so that you can identify exactly which rivets are leaking. Identify the leaky rivets both inside and outside on the boat with a marker...You will need a buddy to help you. Strike the flattened end of the rivet inside the hull with steel hammer. Be carefull with hammer or you will put a hole in your hull. This method takes a lot of patience and a good friend."

Who got to go underwater to help with this procedure?
Reply With Quote