[corebran]

My rifle only ejects the round after firing, so on my last shot if I try to manually pull the bolt back to eject the round so it's cleared it won't eject. If I manually run the bolt back cycling the rounds to check the function it will eject every round.Recently took it apart and cleaned it using a few drops of oil in the receiver and on the bolt however whipped all access out. Didn't break the bolt down or really touch the ejector. Also have adjusted the barrel lately so the ejector is pretty much dead on center in the notch for it on the barrel on the replacement to my green mountain target barrel. Using factory mag on my 10/22 about 3 yrs old now and cci segmented hp 1640 fps. Also a green mountain target barrel. Any ideas? That last round is just stuck and the ejector doesn't wanna grab er when I go to manually pull my bolt back.Thanks folks.