Quote:
Originally Posted by Bobalong52
"Partly fill the boat with water or float it so that you can identify exactly which rivets are leaking. Identify the leaky rivets both inside and outside on the boat with a marker...You will need a buddy to help you. Strike the flattened end of the rivet inside the hull with steel hammer. Be carefull with hammer or you will put a hole in your hull. This method takes a lot of patience and a good friend."
Who got to go underwater to help with this procedure?
|
It must have been you since you are the one asking the silly question.
I am just trying to help someone out. Obviously you need to read between the lines a bit.