Quote:
Originally Posted by waldedw
I am just starting to develop loads for mine, have taken it out to 725 yards so far but I know it will reach much farther.
The load that is awesome now is 143gr ELDX over 67.5gr US869 federal 210 in Hornady brass, have loaded the same load in ADG brass and it shoots very good also, can't tell the difference.
Have had good results with 59gr Retumbo as well as 58.5gr RL25 but not quit as good at the US869
Am working on a load now with the 147 gr ELDM I'll post back once I find out what works.
|
I found that the Hornady brass worked fine, for two firings, then the neck tension became significantly less consistent, and the groups opened up. If I had to use Hornady brass, I would anneal after every two firings.