I got my Marcum used and the guy had 2 cameras with it. He said the original one would fog up so they sent him a replacement.
After sitting around for however long the moisture evaporated and picture was fine when I got it.
So what I did to both cameras, and would do to any camera now is I put some 3M 5200 (marine adhesive) at the end of the cable, since I’m guessing that’s where the leak came from.
After the 5200 cured, I taped over the lens and sprayed the whole thing with Leak-seal, same as the Flex-Seal. Put 2 coats on, and add another at the end of the season. The camera doesn’t leak / fog anymore so it seems to have worked.
Cheap insurance even if it’s not leaking.
__________________
Theres a fine line between fishing and just standing on the shore like an idiot.
|