I like cut on contact BH then chisel points. I do not like mechanical heads.
100gr. broadheads. My shafts all done head, vanes, nocks etc. weigh, 388 grs. @ 64# draw weight. or 14.1 grs. per inch. complete pass through's are the norm. If I was going for elk or moose I would screw on my 125gr. heads.
As others have stated arrow flight is way more important then arrow weight EXCEPT if you go to light you will destroy your bow.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|