View Single Post
  #26  
Old 02-18-2018, 12:15 PM
Dick284's Avatar
Dick284 Dick284 is offline
 
Join Date: May 2007
Location: Dreadful Valley
Posts: 14,621
Default

Quote:
Originally Posted by lone wolf View Post
Dick, for reference here is a link to Nosler's online reloading data. All but two of the listed loads (albeit max loads) exceed 3K for this caliber/bullet combination . The two that do not come awfully darn close.

https://load-data.nosler.com/load-da...kley-improved/
Ok.
Go make some loads up with you’re 26” bbl’d 280AI and report back your findings.

For the record, I’ve got a 25” gain twist .280AI, and albeit a slow twist rate. Getting much over 3050 with 150’s resulted in horrid case life.(high pressure) I can’t see 3 k with 160’s as a high return proposition.

And seeing that cracking the 3k mark with a 160’s in a 7 Rem Mag is doable but you’ll ride the upper end of the pressure threshold to do it. Again this is real world numbers, and dispense with the fast barrel slow barrel stuff too, we tested 5, 24” bbl’d 7 Rem mags and fastest to slowest in barrels was a whopping 25fps, on average.

I’ll still call it a highly unlikely endeavour.


Enjoy this video.

https://youtu.be/N1Sw8fe9hJI
__________________


There are no absolutes
Reply With Quote