Quote:
Originally Posted by obsessed1
I built a removable winch system for my brothers truck on the cheap. He didn't want anything permanent. I used a sheet of 1" plywood cut to 24"x5' ( width of his truck bed) I bolted on a 6'6" 4x4 post with through bolts nuts and washers. And mounted a hand crank winch to the 4x4. The reason I went with 6' for the 4x4 was so the hand crank was out the side of his truck and wouldn't hit it when cranking. A thick piece of carpet to cover the plywood and a eye bolt on the far end with snatch block mid line. Hook the winch Hook on the eyelet, slip the plywood between the truck box and cab, attach the critter to the snatch block with a choker cable and crank it up the ramps. Works slick and can be made for cheap. Pretty sure the system can be adapted to a powered winch with some thought... Whole thing just lifts out of place and rides in the box when not in use.
|
Picture?
Sent from my iPhone using Tapatalk