Quote:
Originally Posted by pikergolf
snip
I pulled the action out today, the screw that squeezes the recoil lug was not near as tight as the other screws and the front action screw was almost welded in place, damaged the screw getting it out. No oil or anything else between the aluminum rail and action. Have another action screw on order, will post again when it comes in and is mounted.
|
"the screw that squeezes the recoil lug", meaning is unclear to me.
Is this the 'front action screw'?
If you mean the barrel nut is not tight, that could easily be your problem,
and I strongly suggest head-space be checked by a qualified person before firing again.
IMHE, Savage action screws are very poor quality, the heads are soft, & the hex fit is sloppy and easily stripped, especially with poor quality, soft Allen type hex wrenches.
I am currently replacing several with better quality hex socket cap screws, but would prefer Torx head if I can find any suitable.
IMHO, all threaded connections should be lubricated with anti-seize or LocTite.
Good Luck, YMMV.