A little more progress on the headache rack.
Finished the wiring. Used a little plastic box I had to house the wiring. Went with 4 ga. wire right to the battery.
I ran the winch control back along the box rail and mounted it by the tailgate.
Then I built a ramp. I glued two sheets of 1/2 plywood together. then put a 1x6 on each edge, ripped it in half and put a 1x4 on the inside edge with three heavy hinges.
I also mounted my jack-all and tool box full of rigging/straps.
Thanks for the ideas and advice. Now to get a moose or a big bodied deer and try it out.