Quote:
Originally Posted by TangoKilo
Nothing wrong with your sizing die, just its adjustment.
When you setup your sizing die, make sure that your not bumping the shoulder all the way back.
Blacken the case neck and shoulder with a lighter or a sharpie. Screw your sizing die in a 1/4 turn at a time until the die juuuuuust touches the case shoulder when you run the case in.
|
Myself, I use the Sinclair Shoulder Bump Gauges. No guess work, you know exactly how much of a bump back you've re-sized your brass to.
http://www.sinclairintl.com/reloadin...prod35265.aspx