|
|
09-15-2024, 06:13 PM
|
|
|
Join Date: May 2007
Posts: 1,925
|
|
I hope so! It will shoot as good as yours!
Quote:
Originally Posted by huntinstuff
Nice! The one I had shot extremely well. Im sure yours will too
|
|
09-15-2024, 07:38 PM
|
|
|
Join Date: May 2017
Posts: 483
|
|
organized
I purchased a new gun safe that was on sale,organized while loading it and realised I could use another one lol Almost everything fit
|
09-15-2024, 11:07 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,435
|
|
Quote:
Originally Posted by Dean2
If you use a heat gun to soften the bedding it comes out REALLY easy. Most bedding softens at around 220 to 250 F, so far below anything that would harm wood or most stocks. A lot less work than gouging it out.
|
Thanks Dean 2 will give it a try.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-16-2024, 08:28 AM
|
|
|
Join Date: Dec 2012
Posts: 208
|
|
primed 40 cases on friday evening. Loaded up a powder ladder sunday morning. Now to find some time to get out to the range!
|
09-17-2024, 08:26 PM
|
|
|
Join Date: Oct 2014
Location: West Kelowna B.C.
Posts: 411
|
|
Going to start loading for two savage 24 V from an auction in 222/20 gauge , and have a 270 wsm coming, so have to load up brass I have had for awhile and see how it does.
|
09-19-2024, 11:39 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,435
|
|
De primed and removed crimped on 91ct, .223 Mil brass, uniformed primer pockets, ran neck arbors through the necks, trimmed all to length, wet tumbled and dried for storage. Have another 150ct. coming soon, so no rest for the wicked. Lot's of work, hope it is worth it. Now, I just need dies and a rifle. LOL
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-20-2024, 06:13 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,874
|
|
Loading some 6.5X43 MS this morning for the Mannlicher carbine.
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
09-22-2024, 05:45 PM
|
|
|
|
Join Date: Apr 2014
Location: Parkland County
Posts: 1,144
|
|
I got back into the reloading business. Just kidding. But today after my road race, I started to replenish my stores. I loaded a modest hundred rounds of .45 Colt.
__________________
Check me out on FaceBook….just search 6MT
|
09-22-2024, 06:00 PM
|
|
|
Join Date: Jan 2013
Posts: 2,988
|
|
Made a new ejector for my 9.3x62 mauser. Original one was only ejecting about 60% of the time....not near good enough for me so I fabbed up a new one. Ill probably need to make a new one in the future as the only steel I had handy was .049 thick. Original was .059 thick...It will run for now.
|
09-23-2024, 07:51 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,435
|
|
Deprimed 259 , .223 PMC factory brass. the stock pile grows.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-24-2024, 10:53 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,435
|
|
Prepped other 350, rds of .223 today, right shoulder is a bit sore...LOL. Finally found my RCBS dies. Life just got a whole bunch easier.
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-25-2024, 08:58 AM
|
|
|
Join Date: Dec 2012
Posts: 208
|
|
deprimed and tumbled 60 cases of once fired 300 wsm for my dad. Looking forward to helping him develop a load for his gun.
|
09-25-2024, 10:32 PM
|
|
|
|
Join Date: Oct 2009
Location: Medicine Hat
Posts: 4,435
|
|
Warning: Hornady? Frontier 223 REM
As you all know I have been doing a bunch of brass prep in .223. Well I trimmed 91 cases today with the FC head stamp.
*10 were in trim length specs. (1.760"-1.750")
*15 or more (I never counted) were more then spec. length by at least ~20 thou.
*The rest were ~20 thou under minimum trim length. Now this does not make these unsafe. BUT the over length brass is quite worry some.
This is once fired brass.
Play safe everyone!
__________________
Trades I would interested in:
- Sightron rifle scopes, 4.5x14x42mm or 4x16x42mm
especially! with the HHR reticle. (no duplex pls.)
- older 6x fixed scopes with fine X or target dot.
|
09-26-2024, 07:24 AM
|
|
|
Join Date: Mar 2011
Location: 509
Posts: 881
|
|
I built 2 shelves above my garage door. Then I started organizing. Found a pile of loaded 20 gauge,12 gauge 9mm, 7.62x39, 556
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 09:44 PM.
|