I have a battery charger that has a few 6v and 12 volt settings. For charging my deep cycle battery should I be using the 12V 2AMP or the 12V 15AMP setting. Thanks guys .
If you need to charge them quickly, you can use the 15amp, they will charge to about 80%, after that use the 2amp, If you're in no hurry, then use the 2amp as Tallieho said.
Low and slow is the best way. Also get it on charge as soon as you can, the sooner the better.
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
on a related question, I have a set up with 2 6 volt batteries and have been charging them seperately on the on the 6 volt setting. Wondering if I leave them connected could I charge them on the 12 volt setting ?
on a related question, I have a set up with 2 6 volt batteries and have been charging them seperately on the on the 6 volt setting. Wondering if I leave them connected could I charge them on the 12 volt setting ?
Yes they can be charged in series.
__________________
“One of the sad signs of our times is that we have demonized those who produce, subsidized those who refuse to produce, and canonized those who complain.”
Charging Deep Cycle Batteries
Linear Mode
