|
09-28-2012, 12:50 PM
|
|
|
|
Join Date: Jul 2007
Location: At the base of a mountain beside a creek
Posts: 2,436
|
|
Anyone ever "distress" a hardwood floor?
The main floor of our house has pine hardwood - and we have a lab. You do the math...
We've been in the house for over two years and the dog has scratched the hell out of the hardwood. I was watching an episode of This Old House and saw the team distress hardwood by scraping and banging it using scrapers, chains, metal brushes, etc. In the end it looked quite nice.
My plan is that once the dog is no longer with us, I may do the same as pine is supposed to be a good flooring material for distressing. Has anyone done this and, other than looking very labor intensive, does anyone have any advice?
Thanks!
|
09-28-2012, 01:02 PM
|
|
|
Join Date: Jul 2010
Location: North of Cochrane
Posts: 6,698
|
|
Not a hardwood
Pine is not a hardwood, quite soft really, it will be easy to sand out the scratches when ever you want, put down a nice new finish and you're done.
|
09-28-2012, 01:28 PM
|
|
|
|
Join Date: Aug 2007
Location: airdrie
Posts: 5,211
|
|
you want to use my 6 year old boy? he could distress your floors in a couple hours
|
09-28-2012, 01:32 PM
|
|
|
|
Join Date: May 2007
Location: Uh, guess? :)
Posts: 26,739
|
|
The other option once he is gone is to simply refinish it normally. You can do it yourself if you are handy. I've had it done professionally as part of a larger reno.
|
09-28-2012, 01:33 PM
|
|
|
Join Date: Jul 2010
Location: Calgary
Posts: 9,599
|
|
Quote:
Originally Posted by recce43
you want to use my 6 year old boy? he could distress your floors in a couple hours
|
I can throw in a 7 yr old who can help cut down the time needed.
I bet if you ask sundance he can lend the kids some fish bonkers and they would have it done in 10 minutes flat.
__________________
|
09-28-2012, 02:09 PM
|
|
|
|
Join Date: Jul 2007
Location: At the base of a mountain beside a creek
Posts: 2,436
|
|
Quote:
Originally Posted by densa44
Pine is not a hardwood, quite soft really, it will be easy to sand out the scratches when ever you want, put down a nice new finish and you're done.
|
Good point. Calling Pine a Hardwood is a bit of an oxymoron. I thought that I'd do what you suggested originally but the dog has now worn into bare wood in quite a few spots and created some pretty deep grooves in places - to the point that I'd probably have to take off 3 or 4 mm to smooth out some areas.
The other thing is that our cabinetry is "wood distressed" and thought distressing the floor could really tie it in.
Thanks for the other suggestions - I like the idea of child labor . We have girls, and I never thought to contract a few boys to come in and do their thing...
|
09-28-2012, 03:33 PM
|
Banned
|
|
Join Date: Jan 2010
Location: Kimberley B.C.
Posts: 5,234
|
|
Pine is a terrible wood for flooring,way too soft.But since it`s down,don`t worry about distressing it,give it a year or so,it will be so distressed you may have to give it Valium.
|
09-28-2012, 05:23 PM
|
|
|
|
Join Date: Jul 2012
Location: Outside of calgary
Posts: 757
|
|
I helped a buddy do it once.. ( he does it for a living)..... We actually took chains and beat and pulled them around then spread gravel on it and put a chunk of plywood on top and went skateboarding.... Just put a bunch of "random" scratches and dings on it ....... No bother sanding and refinishing cause the dogs will just do it again!
|
09-28-2012, 05:27 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,637
|
|
Old growth pine is actually very hard as far as softwoods go, but it is very difficult to find these days -- the stuff they are bringing up out of the Gateneau adn Ottawa rivers is bringing top prices.
It is very desirable for decking on boats because of its density.
new stuff? pretty soft!!
I'd be willing to be that the two criminoids that reside at our house wwould wreck it in jig time!!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
09-28-2012, 06:12 PM
|
|
|
Join Date: Sep 2011
Posts: 3,547
|
|
Quote:
Originally Posted by catnthehat
Old growth pine is actually very hard as far as softwoods go, but it is very difficult to find these days -- the stuff they are bringing up out of the Gateneau adn Ottawa rivers is bringing top prices.
It is very desirable for decking on boats because of its density.
new stuff? pretty soft!!
I'd be willing to be that the two criminoids that reside at our house wwould wreck it in jig time!!
Cat
|
Used to be lots of pine floors in the good old days. Pretty sure they used the heartwood of the old growth too.
I woudl love to get hold of some salvaged boards
|
09-28-2012, 06:56 PM
|
|
|
|
Join Date: Aug 2007
Location: Calgary
Posts: 19,420
|
|
Old Douglas Fir can be pretty hard for a softwood as well, I've seen some older homes in Calgary with them, as well as Mrs Caber's old house in Stettler.
The child labor you don't even have to pay, just supply about $7.50 in candy per head. Then give them tonka trucks, gravel, 3/8" nuts, bb's, a pogo stick with a modified foot, small wooden mallets, and some bike chains.
__________________
"The trouble with people idiot-proofing things, is the resulting evolution of the idiot." Me
|
09-28-2012, 07:24 PM
|
|
|
Join Date: Oct 2008
Location: Whitecourt AB
Posts: 3,867
|
|
Distressing sounds like a great way to get out some aggression. lol Maybe look for some volunteers on the fishing forum. lol
Slow growth not old growth for hard pine. Some old growth is 30" diameter. you want 150-200 old trees with 12 inch butts for hard pine.
__________________
"........In person people are nice, because you can punch them in person. Online they're not nice because you cant."
—Jimmy Kimmel
|
09-28-2012, 07:31 PM
|
|
|
Join Date: Oct 2008
Location: Whitecourt AB
Posts: 3,867
|
|
This looks like fun. Can I pleeeeeease help?
http://www.youtube.com/watch?v=hmkb1UxY8ww
__________________
"........In person people are nice, because you can punch them in person. Online they're not nice because you cant."
—Jimmy Kimmel
|
09-28-2012, 08:28 PM
|
|
|
Join Date: Sep 2009
Location: Calgary
Posts: 4,962
|
|
Uhhh....just one little minor question to the OP...are your floors "pre-finished", or "site-finished". If they're pre-finished that presents a whole new set of problems. You cant just distress pre-finished floors.
|
09-28-2012, 08:56 PM
|
|
|
|
Join Date: Jul 2007
Location: At the base of a mountain beside a creek
Posts: 2,436
|
|
Quote:
Originally Posted by Calgary Dave
Uhhh....just one little minor question to the OP...are your floors "pre-finished", or "site-finished". If they're pre-finished that presents a whole new set of problems. You cant just distress pre-finished floors.
|
I don't believe they are pre-finished - I found some spare boards in the garage and they are raw. However, in case I am wrong, what's the difference? The flooring is not bevelled but is there anything else I need to take into consideration?
|
09-28-2012, 10:01 PM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,637
|
|
Quote:
Originally Posted by Spidey
I don't believe they are pre-finished - I found some spare boards in the garage and they are raw. However, in case I am wrong, what's the difference? The flooring is not bevelled but is there anything else I need to take into consideration?
|
Pre-finished biards are generally done with a very hard laquer, something that cannot be emulated unless it is re-sprayed.
it tends to chip and break insted of denting when stuff is dropped on it.
Site finished floors are more often than not brushed or rolled, or oiled.
Also, many pre- fineished floors contain a stain.....
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
09-28-2012, 10:20 PM
|
|
|
Join Date: Oct 2008
Location: Whitecourt AB
Posts: 3,867
|
|
Quote:
Originally Posted by catnthehat
Pre-finished biards are generally done with a very hard laquer, something that cannot be emulated unless it is re-sprayed.
it tends to chip and break insted of denting when stuff is dropped on it.
Site finished floors are more often than not brushed or rolled, or oiled.
Also, many pre- fineished floors contain a stain.....
Cat
|
Also you need to completely remove the lacquer on a pre finished floor before you can re-stain it.
__________________
"........In person people are nice, because you can punch them in person. Online they're not nice because you cant."
—Jimmy Kimmel
|
10-04-2012, 09:44 AM
|
|
|
|
Join Date: Jul 2012
Location: Toronto
Posts: 77
|
|
I have a couple of friends who spent a lot of time and money renovating their house. She's an interior designer, he does interior painting and finishes.
They had new floors laid, quarter-sawn red oak in herringbone pattern. The floors were laid by an old Italian guy; flooring was his life's work. He finished sanding on a Friday, and returned Monday morning to lay the poly down.
Over the weekend, my buddy Dave had at his new floors with a chain, just like in the video, so they wouldn't look new anymore. They didn't.
Dave says the poor old guy almost had a heart attack when he came over to the house on the following Monday.....
I do some flooring. This is a cottage where I used reclaimed hemlock (barnboard), and sanded the whole floor with an edger to give it more of an uneven, antique look...
|
10-04-2012, 09:56 AM
|
Banned
|
|
Join Date: May 2007
Posts: 17,790
|
|
sounds like your dogs already distressed your floors.
|
10-04-2012, 10:35 AM
|
|
|
Join Date: Apr 2008
Location: East of the big smoke
Posts: 1,496
|
|
Pine is a great flooring option.
I wouldn't try to sand down the pine to get a perfect finish. That's not what a pine floor is all about. It will become distressed on its own with time. If you want to speed up the process. In idea is to paint or stain floor. lightly with desired colour (greys, browns, to match cubboards) then sand and finish with poly. It will leave dark color in depressions. You could add more distressing before you paint.
I grew up in a home with pine floors. Think of them as having a patina (living finish like copper) that changes and evolves over time. Its amazing how many of my neighbours did pine floors in their homes after seeing my parents.
On new pine floors the first couple of dings hurt. But it's part of the process.
Brad
|
10-04-2012, 11:26 AM
|
|
|
|
Join Date: Jun 2007
Location: Ft. McMurray
Posts: 38,637
|
|
These fine flooors were distressed by two "experts" in about a week - two weeks, but they work with a passion for their calling!
Cat
__________________
Anytime I figure I've got this long range thing figured out, I just strap into the sling and irons and remind myself that I don't!
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:11 AM.
|