Go Back   Alberta Outdoorsmen Forum > Main Category > Fishing Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 01-23-2018, 07:04 AM
Fishfinder's Avatar
Fishfinder Fishfinder is offline
 
Join Date: Sep 2008
Location: Medicine Hat
Posts: 2,015
Default Dropped the ball, er I mean blade. Doh!!

It's been awhile since posting, but I've been lingering and some great threads/posts on here as per usual. Keep it up y'all and stay safe. Love the passion on this forum!
Question for my fisherfolk friends. So I was out at lake lmnop with a couple buddies a couple weeks ago and long story short our day ended with my buds gas auger drill blade/bit falling through the ice after the pin popped out that attaches/holds the blade to motor. This was a new one for me. I am not an avid ice fisherman and more less tag along when I get the call. Anywhoooo, the auger blade is at about 8ft deep at the bottom of the lake, unvisible to the eye, we do not use cameras/gadgets etc. We tried fishing for it with the minimal gear we had but to no avail. I'm trying to figure out how we can get his auger blade Above the ice? Surely someone must know, we can't be the first?? Solutions? All I can come up with is 1-super duper magnet (lol) 2-some sort of massive hook (Like grappling hook!) and sweep the hole? In order to do this we'd likely have to borrow an auger (haha) and drill a couple/few holes side by side to the original hole and sweep the bottom of lake with large hook in hopes of hooking on to his blade. NOTE: I doubt we'll resort to this plus I don't wanna leave a massive hole in this ice. 3-wait till spring and dive for it. I'm thinking our likeliest of options.
My buddy makes good money and he can always buy another blade but I'd rather accept this as a challenge and get it out of the water. They can pull massive trucks outta the ice, so how does one retrieve an auger blade? Anybody, anybody, Bueller, Bueller, feel free to offer advice and experience here. Please

On a completely diff note, I was up in Cowtown over the weekend for wrist surgery (grrrrrrrrrrr) but managed to get out on the Bow Riv with my lil sis who has taken to fishing (Awesome!!) and likely my last fishing trip for a couple months (again grrrrrrrr) but managed 2 nice Browns and a fatty Bow all around 20". Only measured the Rainbow. Was nice to get in some winter open water fishing and look forward to my "checkup" with the Bow... er I mean doctor in 6 weeks! Those who fish this gem of a river on a regular basis are pretty darn lucky I tell ya. Long live the Blue Ribbon!
Back to point, sunken auger blade, advice?
Reply With Quote
  #2  
Old 01-23-2018, 07:30 AM
LKILR's Avatar
LKILR LKILR is offline
 
Join Date: Dec 2012
Location: Claresholm
Posts: 1,070
Default

Should still be there in the spring. I would go get it after the water warms up. I lost a jackal in a river in early spring once. Went back in August when water level was way lower and I retrieved it.
Reply With Quote
  #3  
Old 01-23-2018, 07:32 AM
TylerThomson TylerThomson is offline
Banned
 
Join Date: Dec 2012
Posts: 928
Default

Well the best way is a bigger hole and a magnet. A 100 lb magnet will run you about 30 bucks at acklands and comes with a eyelet on it.

Either that or join the polar bear club.

Good luck
Reply With Quote
  #4  
Old 01-23-2018, 08:37 AM
NSR_RAT NSR_RAT is offline
 
Join Date: Apr 2016
Posts: 113
Default

[QUOTE=TylerThomson;3715018]Well the best way is a bigger hole and a magnet. A 100 lb magnet will run you about 30 bucks at acklands and comes with a eyelet on it.

I have a really strong big earth magnet I picked up off amazon, ran about $60CDN, I forget what it’s rated at,but they should be more than capable to pick it up.
Reply With Quote
  #5  
Old 01-23-2018, 09:02 AM
Teamprotz's Avatar
Teamprotz Teamprotz is offline
 
Join Date: Mar 2009
Location: LLoydminster
Posts: 1,253
Default

Princesssuto has magnets as well and you can always return it when you’re done. Lol
Reply With Quote
  #6  
Old 01-23-2018, 09:47 AM
RavYak's Avatar
RavYak RavYak is offline
 
Join Date: Jul 2011
Location: West Edmonton
Posts: 5,174
Default

8 fow, cut a big hole jump in and get it. Would probably make for an entertaining way to spend the day.

Either that or get a camera and some ropes and a pole and try to get the rope looped around the one end and then pull it up.
Reply With Quote
  #7  
Old 01-23-2018, 10:24 AM
cube cube is offline
 
Join Date: May 2011
Posts: 1,942
Default

Bring branches etc and perhaps some black plastic or surveyors tape to mark the hole after.

Cut out block of ice. Auger 4 holes. Use Ice saw or long enough chainsaw to cut between the holes. Push ice block under the ice. Take magnet and pull out auger leg. A roof rake pole and a snare might also work.

A camera might help in locating the exact location of the leg.



Good Luck
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:16 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.