300 win mag reloading

[archeryguy]

hey guys im having problems finding the right load for my gun its not grouping like it should be., its a tc pro hunter, 300 win mag.using 180gr hornady interlock. has anyone have any recipes that work for them?
thanks

[Ice Fishing Maniac]

Maybe another bullet or powder-your rifle may not like the Interlocks. 180gr Accubonds are my medicine with RL22 out of my Sako m75ss 300WM.

How did any factory ammo shoot?

[archeryguy]

ok thanks, ill have to try somything differnt. and factory ammo shot awsome, it grouped within a inch at 200 yards

[cody c]

200 grain NAB's work for my brother, mine does decent with 180's.

Just gotta put in the time and play with a few different mixes, I might try 168 TTSX's next to try and tighten things up.

[MattSako]

everything i tried in the 300 win mag.. was 1/4 inch at 100 yrds. Here are my 2 load.

178gr BTHP Hornady RL 22. 75 gr

190 HPBT Sierra RL 22 70.5 gr

[warriorboy10]

I went through several loads/Bullets before I found what worked in my 300 Win Mag
Model 695. First of all get rid of the Interlocks. Cheap bullets isn't necassary way to go. I had Interlocks flying all over the place. And too hot of load wasn't workin either. What I ended up with is 180Gr. Nosler Partition or Berger VLD 185Gr.with 75Gr. of Hodgson H4831SC. Took some experimenting to get there but it shots great and long. I now have it dialed right in and know where my gun is shooting at all distances.
Hard to comprehend the difference between the loads/bullets until you go through it.
Be patient, let the gun do the work. Good Luck!!