Garage door spring replacement in Calgary?

[camshaft]

Arrived home to discover my garage door only opening a few feet. Looked and saw one of the springs broke. Awesome sauce!

Any suggestions on a reputable company here in Calgary and a rough estimate to have both springs replaced by the pro's?

I'm sure many have tackled this by themselves, but this isn't a job I'm interested in trying lol

[Raptor Boy]

Call Calvin @ overhead door, I can pm you his number.
Think your looking at about $300-350

[clockwrkz]

I used Glenmore doors before. They were really good - great work and was a lot cheaper than I feared at the time. No idea on the cost for just replacing the springs though.

[RigPig]

Did mine last month. 120$ installed by me. Spent 20 minutes watching YouTube and 45 min replacing. If you arr keen it really is an easy job.

[270person]

Originally Posted by RigPig

Did mine last month. 120$ installed by me. Spent 20 minutes watching YouTube and 45 min replacing. If you arr keen it really is an easy job.

Just don't loosen your grip on whatever you're winding the spring with. Great way to break an arm or wrist or get knocked flying off your ladder.

[Blastoff]

Originally Posted by RigPig

Did mine last month. 120$ installed by me. Spent 20 minutes watching YouTube and 45 min replacing. If you arr keen it really is an easy job.

Not a big job do the YouTube like this guy, be careful of your fingers,

[slipbobber]

Had mine done here in Red Deer last week by one of the door company's in town. Spring replacement on a 16'' door was $600.

[Raptor Boy]

Originally Posted by slipbobber

Had mine done here in Red Deer last week by one of the door company's in town. Spring replacement on a 16'' door was $600.

Hope they wor a mask or that price is a mis print.
$110 for pair of spring for 16' x 8' in Calgary

[Grizzly Adams]

Originally Posted by slipbobber

Had mine done here in Red Deer last week by one of the door company's in town. Spring replacement on a 16'' door was $600.

That works out to about 500./hour, after parts. One of my clients had one done. 165.

Grizz

[camshaft]

Thx all, have a guy coming tomorrow and will report back with the quality of work and price....

[graybeard]

Bert Snider at (403) 860-0776, he is a local garage door installer and has been doing so for over 30 years.....Really a good guy and good work.

[camshaft]

Was referred to Done Rite Doors from several other members on another forum. Super polite and professional guy (Lonny). Was very quick, and only charged me $200. For that price to have a professional install it, seems like a no brainer!

[DisplacedFlatlander]

Also had Done Rite Doors come work on my door a month or so ago. Did a great job and didn't cost too much at all. Would definitely use again!


Sent from my iPhone using Tapatalk