I got one when it first was available on the market. Not sure of the newer models now and if any changes have been made. This is the Flip-over with the Bench you are asking about?
For myself, I put in a Jiffy 10" STX Auger, Buddy Heater, Tackle, Sonar, UW Cams, Lunch, etc. Did not use the short factory rope it comes with and installed U-Bolts in the holes with Fender washers for added strength. Bought the Clam Harness and it comes with 8' Straps and hooks on with Carbiners. Makes it much easier to hook up and pull around with a load. You can use Eyebolts also but I had U-Bolts lying around so I made use of them. With that hardware, I can hook it up to a Hitch also and tow it with my Quad.
I would suggest picking up RPS Clips ( Rapid Pole System?) that Clam uses on their models. These are clips that go on to the poles. A plastic tab goes over the button and simply push the tab so the button goes in quickly. On cold days, these make the job of take down much quicker without taking off your gloves.
Here's a link with a pic:
http://www.sportsmansguide.com/net/c....aspx?a=575953