|
02-16-2012, 07:30 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
loading 243
Need to use up my H4831 in my 243 ,anyone have any good loads they want to share.
|
02-17-2012, 06:24 PM
|
|
|
Join Date: Apr 2011
Location: South Alberta
Posts: 1,025
|
|
Ive only used Varget, Winchester 760 and IMR 4064 with a .243
Start midway between min and max loads. Work a bit up and a bit low from there. See what your gun likes!
Good luck with load tuning!
__________________
Cynicism gives you a huge advantage in a world that deserves disbelief.
|
02-17-2012, 06:27 PM
|
|
|
Join Date: Jun 2008
Location: Calgary Area
Posts: 2,378
|
|
Bergers
I load for 95GR berger vlds with 4831 and have very good results. Go to there website and they will email you load data.
|
02-17-2012, 08:25 PM
|
|
|
Join Date: May 2007
Posts: 15,827
|
|
Quote:
Originally Posted by markg
I load for 95GR berger vlds with 4831 and have very good results.
|
I do the same.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
02-17-2012, 08:52 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
What powder IMR or H
|
02-17-2012, 09:17 PM
|
|
|
Join Date: Aug 2008
Location: south of calgary
Posts: 1,831
|
|
benchers tell me 42.8 gr of imr 4831 and 80 gr bullets,lee
__________________
220swifty
1. People who list their arguments in bullets points or numerical order generally come off as condescending pecker heads.
2. #1 is true.
|
02-18-2012, 06:45 AM
|
|
|
Join Date: Jul 2007
Location: Calgary
Posts: 1,010
|
|
IMR4831 works better with larger(90 grain+) bullets according to Ken Waters book. Go to the IMR website for specific loads
|
02-20-2012, 02:49 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
i have lots of h4831 ,this what i want to us on the 243.
|
02-20-2012, 03:10 PM
|
Banned
|
|
Join Date: Jan 2011
Posts: 722
|
|
What bullet?
R.
|
02-20-2012, 03:17 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
Have not bought any yet.
Can you recommend a bullet that works good with H4831
|
02-20-2012, 03:35 PM
|
Banned
|
|
Join Date: Jan 2011
Posts: 722
|
|
Quickload is suggesting 45 grains of H4831 with a 95 grain Nosler CT bullet.
This yields 2994 fps, and a fill rate of 102.9 percent.
I cannot, and will be responsible for this load, in yours, or anyone elses rifle.
Presure is stated at 53791 psi. Well below the 60191 max listed.
R.
|
02-20-2012, 04:12 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
Sounds hot,,were crushing down the powder
|
02-20-2012, 04:20 PM
|
Banned
|
|
Join Date: Jan 2011
Posts: 722
|
|
Not hot at all. Start slower and work up. Or consider changing powder.
R.
|
02-20-2012, 06:33 PM
|
|
|
|
Join Date: Mar 2010
Posts: 610
|
|
44grs had slight ejector marks on my brass with a 95gr. sst
|
02-20-2012, 06:37 PM
|
|
|
Join Date: May 2008
Posts: 1,501
|
|
Anyone buy reloading manuels any more?
|
02-20-2012, 09:16 PM
|
|
|
Join Date: May 2007
Posts: 15,827
|
|
I shoot enough H4831 in Lapua cases behind Berger VLD's to get me 2950 fps with plenty of breathing room. There may be better powders that will gain a few fps but I have enough of the H4831 to burn out a barrel and it is an accurate load.
And yes I have several reloading manuals.
__________________
“I love it when clients bring Berger bullets. It means I get to kill the bear.”
-Billy Molls
|
02-21-2012, 06:26 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
I do have two manuals ,they just don't give any loads for H4831.
Was going to stick with Hornaty Bullets maybe 95gr. sounds like the bergers might be the way to go
|
02-21-2012, 06:34 PM
|
|
|
|
Join Date: Feb 2010
Location: Sturgeon County, Ab.
Posts: 3,129
|
|
The following loads are published in the Hodgdon 25th edition Manual using H4831. start at the bottom
80 grain bullet--minimum 44 grains, maximum 48 grains
90 grain bullet--same as above
100 grain bullet--minimum 44 grains, maximum 46 grains
Leo
|
02-24-2012, 08:49 PM
|
|
|
Join Date: May 2007
Location: Edm.
Posts: 4,895
|
|
Thanks leo
I picked up some Hornaty 87 v max and some 105 match bullets.
My Hornady book did not show these loads at all .
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:24 AM.
|